Propagator Locations

Lattice Size: 32³ × 64 \( a = 0.085\rm fm\)

ma = 0.004

• Location: HPSS tape filesystem:
  • Overlap Propagators: /home/mlujan/props/004_03_hyp
  • DWF Propagators: /home/mlujan/dwf_props/004_03
• # Propagators: 51 each with 4 different source positions (x, y, z, t). Total of 204 propagators.
  • Position 1: (16, 16, 16, 10)
  • Position 2: (0, 0, 0, 26)
  • Position 3: (16, 16, 16, 42)
  • Position 4: (0, 0, 0, 58)
• Configuration List: configs_m0004
• # Overlap Masses: 16

Overlap Masses

No.	ma	est \(m_\pi (\mbox{MeV})\)
1	0.00069	100
2	0.00148	140
3	0.00253	180
4	0.00349	210
5	0.0046	240
6	0.00585	270
7	0.00677	290
8	0.00765	307
9	0.00885	330
10	0.0112	364
11	0.0129	390
12	0.0152	419
13	0.018	450
14	0.024	510
15	0.03	570
16	0.036	630

ma = 0.006

• Location: HPSS tape filesystem:
  • Overlap Propagators: /home/mlujan/props/006_03_hyp
  • DWF Propagators: /home/mlujan/dwf_props/006_03
• # Propagators: 53 each with 4 different source positions (x, y, z, t). There were multiple sets of sources. They are given below
  • Set 1 source (16, 16, 16, 10), (0, 0, 0, 26), (16, 16, 16, 42), (0, 0, 0, 58)
  • Set 2 source (0, 0, 0, 10), (16, 16, 16, 26), (0, 0, 0, 42), (16, 16, 16, 58)
  • Set 3 source (8, 8, 8, 10), (24, 24, 24, 26), (8, 8, 8, 42), (24, 24, 24, 58)
  • Set 4 source (24, 24, 24, 10), (8, 8, 8, 26), (24, 24, 24, 42), (8, 8, 8, 58)
• Configuration List: configs_m0006
• # Overlap Masses: 16, same as above